90aa34c1

Water And Mold Restoration

Mon, 18 May 2026 11:15:13 GMT

Water And Mold Restoration

Mold is a common problem experienced in homes and places of work, especially in environments where water or moisture is present. If you have seen mold develop in your home or workplace, you might be wondering what you will do to get rid of it.

Water and mold restoration is the procedure used to remove mold that usually occurs because of water damage.

This article will discuss water and mold restoration. Before you finish this article, you will understand what mold and water damage restoration is and what causes mold and water damage.

In addition, you will also see how to perform mold and water damage restoration and how you can prevent mold from coming back and spreading after doing water and mold damage restoration.

What is Water Damage Restoration?

Water damage restoration is the procedure used to remove moisture or water that enables a thriving environment for mold. It is also a process that helps you regulate moisture levels in your environment to halt mold growth.

This process involves removing water or moisture from any water source and drying it thoroughly before commencing mold treatment.

What is Mold Damage Restoration?

Like water damage restoration, mold damage restoration involves getting rid of mold in an environment by drying the moisture or water that enables the breeding ground for mold. Mold is an example of secondary damage that happens because of water damage that is unattended to.

While mold-resistant coatings and construction materials are an option for mold damage restoration, regulating moisture levels is still the most straightforward technique for halting the growth of mold.

How To Do Mold Damage Restoration

The first thing to do to restore an environment to normal after mold damage is to inspect the property and conduct mold testing.

After doing the property inspection and mold testing, follow these steps to remediate mold damage:
1. Set up an enclosure
The work will be on the entire building. However, the mold damage restoration company you hire will construct a temporal chamber. Mold damage restoration involves mold removal and increases the level of mold in the atmosphere during the operation. This temporal chamber helps to keep these mold spores within the specific area that is under treatment.

2. Install necessary equipment
If structural elements like the framework are still moist, the company you hire will install dryers. These dryers and fans, together with the air cleaner, will help to remove surplus mold spores.

3. Remove mold
After installing the needed equipment, it’s time to remove the mold. The company will remove the mold by dismantling and disposing of all the construction materials like drywall and carpet contaminated by mold.

4. Clean with antimicrobials
All the building materials contaminated with mold will be treated with antimicrobials to eliminate mold. If mold contamination is severe, they can use harsh or corrosive chemicals to treat the mold, but it must be done only by experts.

After cleaning with antimicrobials, all the non-porous surfaces inside the enclosure, such as marble, tiles, etc., will be thoroughly cleaned to remove mold spores that might have gathered in the air. In addition, they will use HEPA vacuums to clean and dust every corner of the chamber.

5. Spray with mist
After the antimicrobial treatment, the mold and water damage restoration company will treat the concentration of mold spores in the atmosphere with an antimicrobial spray, sprayed using a ULV (Ultra Low Volume) backpack sprayer.

6. Do the last deep cleaning
After spraying the antimicrobial spray, the mounted enclosure will remain in place, and air purifiers will continue to operate for about 48 – 72 hours to remove any leftover mold spores. Based on how severe the mold damage is, the mold and water damage restoration company might need to return afterward to perform a second check through scrubbing and misting.

Note: It is recommended that you hire a mold damage restoration company for your mold damage remediation needs. Non-experts shouldn’t try mold damage restoration.

How To Do Water Damage Restoration

To do water damage restoration, you must hire a water damage restoration expert to do the job for you. As soon as the water damage remediation specialists arrive at your affected property, they will use moisture detection meters to examine the parts of your building affected by water damage.

They will evaluate their results and manually remove as much water as possible. After that, they will set up drying tools like air movers, dehumidifiers, etc., to remove any last drops of moisture.

Removing water or moisture from the floor or surface usually takes 3 to 4 days. Afterward, the company experts will use moisture meters to verify and see if everywhere is dry.

How to Stop Mold from Reappearing and Spreading After Water and Mold Damage Restoration

Your family or colleagues in your workplace can inhale clean air once more if you get rid of mold and ensure it won’t grow back. Take the following steps to reduce the risk of new mold formation after performing water and mold remediation:

1. Find the cause of the mold spread
Finding the root cause of the mold spread requires some investigation, but it is worthwhile. When you identify and handle the main issue, you will be less likely to carry out mold eradication in the same spot. You can do this by contacting a mold testing and removal company.

2. Pay attention to known wet areas
Does the air in your home or workplace often smell and feel humid? Before mold starts to grow and thrive, pay attention to areas that are always wet so you can remove the moisture from these areas before mold growth begins.

3. Reduce the moisture level in your workplace or home
High levels of wetness are necessary for mold to thrive and grow. Reduce the moisture level in your environment drastically, but ensure that you have sufficient humidity to keep your rooms comfortable.

Final Words
This article has explained water and mold restoration in detail. Water and mold restoration is a process used to get rid of moisture and remove mold that is a risk to health in homes and public places.

Remember to hire a professional water and mold restoration service for your water and mold damage restoration needs.

FAQ
Does mold usually grow when there is water damage?
Any water damage can create a thriving environment for mold formation. However, this does not imply that mold growth will always occur whenever there’s water leakage.

Several variables will determine the likelihood of mold growth, including the level of water damage, how soon it was cleaned and dried, and the number of surfaces involved.

Water Damage Restoration Company

Sat, 16 May 2026 08:20:06 GMT

Water damage requires quick action – regardless of whether it occurs suddenly or has developed gradually over a longer period.

The most common causes include small and large pipe damage, penetrating rain, or extinguishing water. Other causes include flooding or other types of storms. Additionally, many people get water damage from a blocked drain on their air conditioner. Naturally, this damage can be in commercial buildings, homes or condos.

The type of restoration needed is just as varied as the causes of the damage. However, we have powerful drying equipment for all situations.

For example, it may be necessary to uncover water pipes to eliminate leaks. It may also make sense to remove wallpaper to ensure that walls and components dry as effectively as possible.

Get Professional Help Today

If you have water damage call our water damage restoration company today! No matter what caused the water damage, hiring professional hands guarantees an optimal solution.

How does a water damage restoration company work?

There is a fixed procedure for how trained specialists proceed in the event of water damage. These steps are necessary so that you can enjoy your condominium, home or office again sustainably and in the long term – without moisture and mold:

1. Immediate measures to limit the damage

A water damage restoration company will help you IMMEDIATELY to limit the damage! Here, every minute counts to keep the damage as low as possible. The professionals will remove the water with water suction devices and use dryers and fans.

2. Damage assessment (documenting the damage)

The water damage restoration company can also help record the damage. Before then, you’d have already explained the first data during your first telephone call with the company. Afterward, the water damage restoration experts document further details of the damage on-site with photos and measurements of the moisture.

One Call Does it All!

As a home, condo or commercial building owner: your building insurance and/or household contents insurance company needs to be aware of the damage. Naturally, our company will assist with the paperwork and bill your insurance company directly.

As a tenant: your landlord or property manager needs to be aware of the damage. The building manager would hire our company to resolve the problem.

NOTE: Do not begin repairs before reporting the damage. However, your insurance company will require you to mitigate the damage. Naturally, you can stop more damage from taking place. Just don’t make repairs until your insurance company has seen the damage.

Leak detection

We can use leak detection equipment to find the source of a leak. Oftentimes, the cause of the damage cannot be identified directly. For example, if a pipe in the wall has broken, you can’t easily localize that. However, by using modern equipment and methods, professionals locate the cause of the damage as precisely and non-destructively as possible.

Help is Just a Phone Call Away

If the location of the leak is identified, the effort required to uncover and repair the leak can be reduced to a minimum.

Mold Treatment

Mold is often the result of improperly remediated or undetected water damage. They can pose significant health risks due to toxic mycotoxins (mold toxins) in the air. Severe respiratory infections, allergies, and infectious fungal diseases of the skin (mycoses) are conceivable.

Experts will clarify the cause of the mold formation and provide sensible recommendations for action for mold remediation.

1. Dismantling

Before the water damage restoration company can completely remove and dry the water damage, they have to dismantle the affected area. For example, in certain cases, parquet, laminate, screed, wall plaster, insulating material, or even underfloor heating pipes have to be removed.

This is necessary so that they can clean up the water damage from scratch. Otherwise, there will still be problems in the long run.

2. Drying (removing all moisture)

A water damage restoration company will help to remove the moisture from your ceilings, walls, and floors with specialized drying equipment. Consequential damage such as mold growth or damage to the building fabric is thus avoided.

There are a wide variety of drying devices, such as:

adsorption dryer,
refrigeration dryer,
microwave dryer or
supporting devices such as infrared systems,
construction fans,
electric heater

Water damage restoration companies also use large-scale drying systems for industrial halls and micro-systems for minor damage.

NOTE: Just because it looks dry on the surface, it may still be wet on the inside. Water damage often goes deep into the building material. Thoroughness is therefore the be-all and end-all.

Refurbishment (restoring the original condition)

In the final step, a few water damage restoration professionals will restore your apartment or house to its original condition. Our company will take over the coordination of the entire renovation for you after water damage has been repaired – so that you quickly feel comfortable again in your apartment or house. We are one of the few South Florida water damage restoration companies that is also a General Contractor. Consequently, we are able to say in our slogan, “One call does it all” since we can get everything dry and rebuild as necessary.

Odor neutralization as part of water damage restoration

Moisture and water damage are often accompanied by unpleasant odors.

This applies equally to office buildings and homes. Water damage restoration companies such as ours, also offer professional odor neutralization. This effectively eliminates odors. Whether mold, bacteria, urine, adhesives, or nicotine.

Untreated Water Damage Quickly Becomes a Mold Remediation Problem

The odor neutralizers suck in the unpleasantly smelling air and oxidatively break down the microorganisms, pollutants, bacteria, and the likes that it contains.

Don’t ignore water damage, hire an expert water damage restoration company! Untreated water damage quickly becomes a mold remediation problem.

When it comes to water damage, a small cause often leads to major inconveniences. Don’t wait for toxic black mold to show up. Get in touch with a water damage restoration company.

Water Damage Restoration Company

As a drying specialist, we are specialists in water damage restoration and will provide you with reliable support with the right methods in the event of damage.

Whether it’s a burst water pipe, heavy rain, flooding, or wetness from extinguishing water after a fire.

Contact South Florida Water and Mold Restoration, Inc now and avoid high costs due to consequential damage!

FAQs

What to do with wet books, files, or paper?

As a first immediate measure to eliminate water damage, we recommend separating damp paper from the unaffected books, files, or documents.

Sort out the documents that are worth preserving and keep them as cool as possible, because there is a risk of mold forming here.

Costs associated with water damage restoration

Water damage can be very easy, but it can also be very difficult to repair. If only the drying and painting of the room are required, the restoration is of course cheaper. If walls have to be pried open, pipes replaced and expensive equipment used, higher costs arise.

How long does it take before you can start renovating after water damage?

This depends on the extent of the water damage and the “reaction time”. If you have a lot of damage, it can take a few weeks before repairs can begin.

In the case of only superficial “moistening”, infrared heaters do a good job and shorten the period until renovation after water damage to one to two weeks.

Water Damage Mold

Sat, 16 May 2026 08:17:09 GMT

Water Damage Mold

Mold is often stubborn and often reappears in the same place after a few weeks. This is because many do not know the causes and therefore do not fight the mold properly.

Water damage is one of the most common causes of mold in the house. The humid South Florida environment is an ideal growth environment for mold.

More than a cosmetic problem, mold can damage your home and contribute to health problems. Not all mold fungi are dangerous though, but most are. Hence, to make your home safe again, you need to identify the cause of the mold. Then, plan remediation immediately.

In the following, you’ll find more information about water damage mold and what to do about it.

Types of water damage that causes mold indoor

The most common sources of water damage mold are:

Penetrating rain on roofs
Floods after heavy rain
Pipe ruptures due to corrosion or the effects of frost
Broken sewer lines
Defective fittings
Burst washing machine or dishwasher hoses
Construction defects, leaks, and inadequate insulation
Extinguishing water

How dangerous is water damage mold?

In the tombs of the pharaohs, mold had proliferated over the millennia. The archaeologists examining the tombs unknowingly breathed in the poisonous fungal spores present in the air. Many fell ill and some died. That’s how dangerous molds can be.

Mold and mold spores are part of our environment and are involved in many organic decomposition processes. So in that sense, they are very useful. However, they can also affect human health if they proliferate and mold spores are inhaled.

Allergic reactions and an increased risk of respiratory diseases such as asthma and other respiratory infections can then occur. Additional symptoms such as fever, headaches, body aches, or concentration disorders can also occur as a result of increased exposure to mold.

Water damage mold does not only affect the health of the occupants of a building. It also affects the substance of a building.

Molds decompose organic materials such as wallpaper and wood. For example, if wood-destroying fungi attack supporting beams or the roof truss, a house can become uninhabitable in the worst case.

Common types of mold that water damage causes and how to identify them

Many different types of mold can take hold in your home due to water damage. We briefly introduce them to you here:

Black mold

Black mold is one of the best-known types of mold and is considered to be particularly aggressive and hazardous to health. The mold is black because the mold spores are very dark. Depending on the type of mold, black mold can be dry and powdery or slimy-gray.

White mold

White mold is less conspicuous, which is why it often goes unnoticed on light-colored walls for a long time and can initially spread unhindered. Only over time does it turn a little darker. If there are no obvious signs of mold, a musty smell can be the first clue that it is white mold.

A white fuzz can also form on the surface of potting soil if watered excessively.

Green mold

Green mold grows on food, and flowers, but also damp walls and ceilings. Wet rooms such as bathrooms and kitchens are particularly at risk, as are joints, and areas under floor coverings or behind wall cladding.

Where greenish mold has spread, it is not uncommon for other types of mold to be found. Although green mold is less harmful than black mold, it can still trigger allergies, asthma, or headaches.

Yellow mold

Yellow mold primarily affects starchy foods, but it can also appear on damp walls or damp potting soil. Also, this kind of mold is mostly found on greasy compost.

Get Mold Remediation Help Today – Call Now!

Water damage mold often spreads in places that are not visible at first glance. So take a look here as well:

in cool corners of the room
behind furniture that is too close to the wall
in rooms where you hang out damp laundry to dry
around the window and on the lintel

No matter what type of water damage mold you discover, you should not remain idle. Remove it promptly so that it does not spread further.

Effective and Definitive Remedies for Water Damage Molds

On the internet, there are many articles on “home remedies for mold”. Those remedies are ineffective because they only clean the surface and neither kill the mold nor take it away completely. Not only that, if you use those remedies for water damage molds, the molds will keep coming back.

Even a professional biocide to disinfect mold requires many hours of treatment. Naturally, a little bleach or baking soda won’t be enough to get rid of mold.

How about anti-mold paints? They are also ineffective when it comes to mold removal. They are only good as preventive measures.

How do professionals remove water damage mold?

Once the source of the water damage mold and the extent of the mold infestation has been identified, the measure can be planned precisely.

Our company seals off the affected rooms from the other rooms so that they are airtight. A negative room air pressure is generated in the affected rooms and the mold infestation is eliminated.

The infested room is then thoroughly cleaned, infested surfaces are disinfected with powerful chemicals, and everything contaminated with mold spores is finely cleaned.

Afterward, plaster, wallpaper, and flooring can be rebuilt and finely cleaned furniture and inventory can be put back.

Note: If you try to remove the mold yourself, you can do a lot wrong and put yourself in danger. That’s because you don’t have access to the same safety equipment that professionals use. Also, you don’t have the same technological know-how as experts.

How to prevent water damage mold

A water damage event is a perfect breeding ground for mold. It is therefore important to avoid them as much as possible. You should pay attention to a few things, as we explain below.

Construction defects and damage

New buildings must dry out well before they can be occupied. Technical drying devices can support this. If the walls are not sufficiently dry, they form the basis for mold growth for years to come.

In the case of older buildings, it is important to check whether there is any damage to the structure that could lead to water ingress. For example:

Slipped roof tiles
Damaged connection plates on the chimney or roof area windows
Plaster cracks in the outer wall
Leaky joints
Leaks in the water pipes
Leaky or clogged gutters and downspouts

In the rooms

Take the following measures:

Ventilate after cooking or showering
Depending on the living situation, the room should be aired three to four times a day for several minutes
The laundry should be dry inside if possible. If there is no other way, it must always be well ventilated
Furniture should not be placed directly against the wall. A distance of about five inches is ideal so that the air can circulate behind it.

Conclusion

Water damage mold is not an emergency for many people. However, if you have a health condition that puts you at greater risk of complications; and you believe you are experiencing symptoms of a mold-related infection, you should consult a mold remediation company for removal and treatment.

Mold Remediation Companies

Sat, 16 May 2026 08:14:57 GMT

Mold remediation companies in South Florida don’t always have the best reputation. Consequently, you always need to check reviews to help find the best mold remediation company . Some people prefer to check Yelp Reviews and others like to check Google Reviews. Naturally, either of these sources would be helpful. Although we have excellent reviews, sometimes you run into someone that just wants to complain. For that reason, people will often ignore one bad review if all the others are very good reviews. However, we only have 5-Star reviews.

Mold Removal Companies

You might wonder what makes one mold removal company different from another. Obviously, removing mold is only part of the problem. Once the mold is gone, then someone needs to come in and rebuild the property. One of the benefits of working with our company is that we do both. Consequently, when you call us, one call does it all! In addition to being certified and licensed as a mold remediation company, we are also General Contractors. As a result, we remove the mold and rebuild your property and make it look new.

Direct Insurance Billing

Another benefit of selecting the best mold remediation companies, is direct insurance billing. What that means, is that you don’t pay the bill, your insurance company does. In other words, we won’t ask you to pay us and have you wait to get reimbursed by your insurance company. Instead, we bill your insurance company and we wait for them to reimburse us.

Consider the benefits of hiring us to do mold remediation:

Certified Mold Remediation Company
Fully Licensed and Insured
General Contractors to Rebuild After Mold Removal
We Bill Your Insurance Company Directly

If you have a toxic black mold problem, call us today for fast and efficient service. When you call us, it’s true that, One Call Does it Al l!

6 Common Reasons You Have Mold in Your Home

Sat, 16 May 2026 08:12:16 GMT

Mold in your home is unsightly, damaging, and dangerous. It ruins the structural integrity of your walls and, if left untreated, it can even lead to health problems.

Unfortunately, mold is often unavoidable. Even if you keep your house tidy and spotless, mold may be growing in unseen places. Once it comes to the surface in the form of ugly, velvety stains on your wall, it’s too late to prevent it.

Below, we lay out the 6 common causes of mold in your home.

1. Leaky Pipes or Roof

Mold caused by leaky pipes and roofs is hard to avoid because it happens inside your walls, ceiling, or attic—places you are unaware of until a stain appears. If you have an attic, check it regularly for signs of leakage or wear-and-tear on your roof. For your walls, find out where your pipes are running and monitor those spots for any signs of discoloration.

2. Poor Ventilation

Poor ventilation is an excellent producer of mold in your home. Stagnant air in your home creates moisture build-up, which quickly turns into a breeding ground for mold spores. This is especially common in rooms that already receive a lot of moisture such as bathrooms, kitchens, and laundry rooms.

3. Condensation Build-Up

Condensation build-up results from poor ventilation or dramatic temperature differences. For example, in the summertime, the cool air inside your home will press against the heat of your windows, and condensation will build up around your window frames. Overtime, this will cause mold around the windowsills and inside the walls. These pockets of condensation can also be found inside your bathroom, cabinets, and other cool surface areas.

4. Rusty Water Heater

If your water heater is rusty, water could be seeping through and onto the floor. The pooling hot water is an excellent source for mold growth. Because water heaters are typically located out of sight in a home, this mold can spread rapidly without homeowners realizing. Before you know it, the mold is not only on the floor, but climbing up the walls behind the heater.

5. Your AC Unit

In Florida, AC is something that is used nearly year-round. Because of this, mold from a leaky AC unit forms quickly thanks to dripping water. AC closets, too, can experience rapid mold growth due to leaks and condensation build-up in a small, dark area. Ensure that your AC ducts and pipes are fitted tightly and that there is no moisture forming on the unit. Take notice if you ever smell the musty scent of mold.

6. Water around the Foundation

Florida receives a lot of rain, which leads to spots of wet earth and dampness around our homes. If there are areas around your house where rainwater lays stagnant, this will become an easy nesting ground for mold spores. This mold can eventually seep into your walls and to the inside of your home.

Mold is a common nuisance in homes and not always preventable. If one of these 6 common causes has created mold in your house, contact us. We tackle mold damage quickly and efficiently. When you use us, one call does it all!

Do I Have To Use Insurer-Preferred Vendors?

Sat, 16 May 2026 08:10:46 GMT

When faced with an emergency water damage clean-up or fire/smoke damage to your property, who do you call… what should you do? Many property owner’s call their insurance company since you purchased insurance to protect your home, why not get their advice on how best to minimize the damages considering you will want them to pay for the damages.

Some insurance company’s will respond with an offer to send one of their Preferred Vendors – “contractors” to provide the services you need. Many homeowners assume the insurance company’s suggestion of a contractor, is an implied endorsement of that contractor. It is also assumed that the contractor will provide a quality service as they are there to protect the property for the insurance company. Remember one thing, the vendor is Preferred by the insurance company, not by you!

Here is the question so many property owners ask….”Do I have to use my insurance company’s contractor?” The short answer is NO. One of the reasons you may opt out of using your insurance company’s suggested contractor, is you may not have control over how the work is managed or controlled and if you disagree with their approach, you may have little power to oppose them.

Here is a recent story of a contractor sent by an insurance company. A property owner was on vacation for 8 days, upon return to the property, a puddle of water was discovered on the kitchen floor. This was the first indication of a water leak seen by the owner. At the time of the incident and when the claim was filed by the owner, the exact source of the leak was undetermined. The insurance company offered to send their contractor to perform the water damage cleanup and dry out. The property owner agreed to use this contractor with the belief they would handle the job properly and the insurance company would pay the contractor for the services easily since it was their contractor.

The outcome of this situation was nothing short of a nightmare to a property owner that didn’t have the experience to know better. The contractor placed dry out equipment in the affected areas and monitored the equipment every other day by testing the moisture content and humidity inside the property. The source of the leak was identified as a pipe leaking in the kitchen island sink area and a plumber was sent to repair the pipe.

After a couple days of dehumidifiers and fans running, the drywall and cabinetry should have showed signed of drying out. Instead, the affected areas remained very wet, and this contractor did not use the diagnostic monitoring data to determine that another ongoing leak from another source was continuous. Contrary to industry standards, the equipment remained on the property for 33 days when a typical dry out is 3-5 days. As a result of the mismanagement of the this water damage mitigation, the problem worsened over time, and now the water damaged areas have created a significant mold problem.

Although we are not suggesting all stories turn out this way, in this case, the property owner fully relied on the credibility of the contractor simply because the insurance company recommended them and the property owner complained thru-out the process but nothing was done.

In the end, the decision over choosing a contractor should always be the choice of the property owner since they will have to live with the outcome of the contractor’s work for many years to come. We can all agree that not having control over your restoration process can be frustrating and overwhelming.

We are here to help, not cause additional damage. We investigate the source of the leak, and it is our goal to ensure the leak has stopped so the damage will not continue. If you find yourself in need water damage restoration, fire/smoke restoration, mold remediation or reconstructive services, please call South Florida Water and Mold Restoration at 954-923-3340 for a fast and professional response.

South Florida Water and Mold Restoration, Inc.
1221 Stirling Road, Unit 113
Dania Beach, FL 33004
Phone: 954-923-3340
Fax: 954-639-7634

Living with South Florida Tropical Storms

Sat, 16 May 2026 08:09:01 GMT

Living in South Florida, we experience tropical storms that roll in quickly, some which sit over us for a few days, and others that pack a strong wind gust along with constant rain. Sometimes, our homes are not equipped or prepared to handle the unforgiving rain that finds a way to penetrate thru a roof, a stucco crack, or any path of least resistance to get inside your property where it does not belong.

Our company, South Florida Water and Mold Restoration has a motto, “ One Call Does It All ” and what that means to you as a customer, is we can assist you with our resources to minimize the damage on any storm related problems or water intrusion. We can quickly tarp your roof to protect the property from further damage, we perform emergency water extractions 24 hours a day 7 days a week and can dry out wet building materials with our state of the art and updated commercial drying equipment and techniques and bill your insurance company. Our staff is trained on the use of thermal imaging cameras and moisture meters, and certified by the IICRC.

Further, since we are a full service company and a licensed General Contractor, we can restore your property quickly and assist you with your insurance claim and meet your adjuster to ensure you are paid sufficiently to pay for your damages. In addition, sometimes with little or no out of pocket expense to you.

If you have any questions about water damage, mold remediation or restoring your property, please give us a call at 954-923-3340 .

Review Your Policy Coverage, Limits

Sat, 16 May 2026 08:07:33 GMT

As we rapidly approach hurricane season, something to do ahead of time is to review your insurance policy, review the policy limits, and coverage. For example, many insurance companies are putting a limitation (“cap”) on the amount they will pay in the even of a water damage mitigation loss in your property in the amount of $3,000. Be familiar with this limitation so you are not responsible to be out of pocket for any expenses/costs related to a water damage, by taking certain precautions which our company will help guide you in the event of this type of emergency. Another suggestion, is consider all options in the event of a flooded home or broken pipe or leak, you do not have to use the insurance company’s preferred vendor if you choose to have more control over your claim.

We are also here to help you with your mold remediation needs, and General Construction rebuild or remodeling.

We are IICRC certified, and licensed by the State of Florida in mold remediation and General Construction.

Thanks for doing business with us.

Video: Remediation Carpet Installation

Sat, 16 May 2026 08:06:16 GMT

The above video shows the pool hall at a large, local community that sustained a large amount of water damage. As a result, the existing glue down carpet had to be removed and replaced. In order to begin the work, all pool tables had to be professionally removed. Our carpet mechanics came in to expedite the repairs, clearing out the damaged carpet and installing brand new carpet quickly and professionally. The project was paid for by the insurance company, with no out of pocket expense to our client.

One Call Does It ALL!

Water Heater Leaks in Condominium

Sat, 16 May 2026 07:29:35 GMT

We have received many emergency water damage phones calls with regard to water heater leaks that occur from the upper floors of a condominium building. In many cases, if not detected immediately, this type of leak will affect the units below where the leak originated.

Even a small size water heater can hold 30 gallons of water. Naturally, that much water can cause some serious damage. For example, if the tank develops a leak, it could be a non-stop drip or stream of water being released until the tank is empty. However, if the leak goes undetected and the water shut-off valve is not closed immediately, the water in the tank will continue to replenish, making a huge mess especially if you not living there full-time to notice it.

Besides the water damage mess this can cause to your unit, you may also be liable for the water damage caused to all the units affected that are below you. As you know, water will continue to travel until it has found its resting place and we have seen as many as 10 units affected from one water heater leak. A leak of this type does not shrink or go away on its own, in time, it will get significantly work so it’s important to respond quickly to fix the problem.

Some of the signs of a leak from your hot water heater may include:

Water on the floor around the hot water heater;
Discoloration of the floor and/or wall around the hot water heater;
Mold on the floor and/or wall around the hot water heater;
A musty odor in the area where your hot water heater is located. A musty odor is a sign of mold, and if you smell that odor, it means you likely have mold somewhere in your home, even if you don’t see it. Since mold often grows in hard-to-spot areas, like inside walls, under carpet and linoleum, and inside heating and ventilation ducts, it’s not unusual to smell mold but not see it.

Sometimes it’s difficult to tell if your hot water heater is leaking or if something else is going on. Condensation around the hot water heater can sometimes make the floor wet and cause mold to begin to grow.

Once you have confirmed it is the water heater that is leaking, pay attention to the location of the leak, is it coming from the top or bottom of the heater?

Some things you should do immediately to prevent further damage:

Turn the power off to the water heater at the circuit breaker – water and electricity are a dangerous combination;
Turn off the water supply to the heater at the cold water shut off valve – most water heaters will have a valve located above the water heater (by code they are required to be here) that will shut off the water supply. This valve will either have a handle that you have to pull down, or a gate valve (essentially a dial) that you will have to turn clockwise to close. If you have a large, serious leak and cannot reach the water shut-off valve safely then you should find the main shut-off valve for the property and close it to stop the water supply to your water heater. Shutting the water off should slow and may even stop the leak depending on where it is coming from.

It is highly recommended that you call a professional plumber to repair the water heater.

If mold has not formed, but you have wet building materials such as drywall, baseboard, or a laminate floor, for example, it is a good idea to have a water damage mitigation specialist place air movers and dehumidifiers in the area of the leak to dry out the wet building materials before mold begins to grow.

Uncovering Hidden Mold

Sat, 16 May 2026 07:28:13 GMT

When we think about the areas where hidden mold can develop, there are many locations that may not be easily recognizable. Of course, if you have a leak on the bathroom floor or around a sink, you will see the leak, dry it up and minimize the damage it will cause. There are other leaks, however, that will be less recognizable, and one area that frequently goes unnoticed is under the kitchen sink.

Let’s consider how often we look, I mean, really look under the kitchen sink. This cabinet especially, is used as a storage area for cleaning supplies, garbage cans, etc. Typically, we open the sink cabinet to grab a cleaning product, it’s usually only open for a few seconds. Therefore, a leak in this area may go undetected until it’s too late and the cabinetry damage is beyond repair. Also, if the cabinetry remains wet for a period of time, it’s very likely that mold has begun to grow causing a mold issue in your home.

Some of the causes of a leak under your sink are:

Water supply valves and lines: these valves and lines are constantly under pressure, so if one connection is loose or a water line has a small hair line crack, water will leak under the sink even when the faucet is in the off position.
Handheld sprayer: a leak can occur on the water line that is attached to the kitchen sink causing water to leak down the water line and drip onto the cabinet bottom. Over time, the water will sit under items stored so it may not be noticeable in time to prevent damage.
Drain pipes: if you have drain pipes made of metals like brass or copper, they can corrode over time and develop a leak. These drain pipes can also become loose and cause a big problem.
P-trap: when this gets clogged, it can cause water to build all the way up your drains and create a leak somewhere along the way.

What should you do when you notice a leak under your kitchen sink?

We recommend you occasionally inspect the sink cabinet for any signs of water damage, warping of cabinet bottom, or any stains from water or mold. This area can be problematic as a continued leak under the sink can spread to adjacent cabinets and destroy all your lower cabinetry. Once water is trapped behind a cabinet, there is no air movement for it to dry out and is a perfect environment for mold to grow.

If you do notice a leak under your kitchen sink, turn off the water supply and contact a plumber immediately to stop the leak before it causes any further damage to your home. If you do have a mold problem, you want to be careful to remove mold safely. Once mold is disturbed, it will become airborne causing a contained issue limited to the cabinets to become an air quality issue which can affect the air you breathe and cross contaminate other areas of the home.

If you think you have a mold problem, and have already stopped the leak, CALL US at South Florida Water and Mold Restoration, Inc. – 954-923-3340 – for a FREE evaluation to determine the extent of damage and to discuss the best professional approach to minimize the damage in the most efficient and safe manner.

MOLD REMEDIATION BACK TO SCHOOL SPECIALS

Sat, 16 May 2026 07:26:29 GMT

As our kids enter their 2015-2016 school year, and are no longer sitting home playing video games or traveling on vacation, it’s time to take care of any projects around the home like water damage restoration and repairs, mold removal/remediation and/or remodeling projects.

We understand that starting back to school can be stressful, and want to make it easy for you to start your next home project since you now have the time to focus on new projects. Therefore, we are offering some valuable back to school specials so you can save a few bucks while improving your property.

For the months of August and September , we will take 10-20% (conditions apply) off the overall price for any water damage or mold remediation service , and we will include a free tile and grout cleaning (up to 300 sf) for any mold remediation and reconstruction service combined .

If you smell or see mold in your home, we would like to offer you a FREE In-Home consultation and visual inspection to discuss any concerns you have.

Please call us at South Florida Water and Mold Restoration to take advantage of the back to school specials.

We can be reached at 954-923-3340 or Lisa@watermold911.com

We are available 24 hours a day, 7 days a week. Give us a call – ONE CALL DOES IT ALL!

SPECIAL LIMITED TIME OFFER – MOLD CLEARANCE TESTING

FOR A LIMITED TIME – we will pay for a third party mold assessor to perform a 2- sample clearance test with the purchase of a mold remediation service (conditions apply) with our company. This is a $400 value.

Once you hire a licensed mold remediation company to resolve your mold issues, it’s critical that you hire a third party licensed mold assessor to perform mold clearance testing also known as Post Remediation Verification testing (PRV) once the work is complete. This test result is a crucial step in the mold remediation process as it will determine if the mold removal efforts were successful and if your property is returned to a normal air quality.

South Florida Water and Mold Remediation, Inc. utilizes licensed third-party mold assessor’s to perform thorough post-remediation evaluations of the areas treated. In addition, we guarantee a successful post remediation test by a third party mold assessor. If we fail the clearance test, we will send technicians back to the property to resolve any issues specified by the mold assessor. Further, we will be responsible for the payment of the cost to retest after a failed test result.

We will stand by our work and satisfy the requirements of the mold assessor so you can have some piece of mind that your project was completed properly.

Give us a call at 954-923-3340 or email us at Lisa@watermold911.com

Providing A Great Customer Experience

Sat, 16 May 2026 07:24:07 GMT

Living in South Florida, we have grown accustomed to variations in customer service expectations. This area of Florida is like a melting pot of different people from all over the world who have various experiences in giving and receiving customer service so the standard of customer satisfaction will be completely different for everyone depending on their expectations.

When we receive calls from potential clients, they are typically very concerned about mold, and the proper procedure for removing it safely. There is no question that our client’s experience level with mold differs greatly from one another as the majority of our clients are experiencing mold issues for the first time. Some of the customer feedback we have received from customers is that they chose us because of the time we spent on educating the consumer on the services we provide as well as the process and most importantly, that we are a full service company; offering water damage restoration, mold remediation and reconstruction services.

Many consumers find it much easier and less stressful to work with one company that can handle the entire job, as our motto says, “One Call Does It All”

Our business location also has a flooring and cabinetry showroom, so our customers are able to select various materials to rebuild their property by scheduling an appointment to work around a busy schedule.

Our goal as a company is to always provide exceptional customer service and a great customer experience. We do that by educating the consumer and working very closely with them to ensure we are meeting their expectations and to make the process much easier to deal with along the way.

MOLD PREVENTION TIPS:

Sat, 16 May 2026 07:22:53 GMT

Mold doesn’t ask for much when it comes to a place to call home. In fact, all mold needs is a warm, moist surface to settle in and begin growing and causing damage and health issues for homeowners. It’s important for homeowners to have a professional assessment of affected areas, remove the damaged materials, and eliminate moisture sources to reestablish a healthy home environment.

If not prevented or treated quickly, mold can grow and cause health issues for those living in a home. Headaches, breathing difficulties, persistent cough, cold symptoms, burning or irritation of the eyes, nose, throat or lungs, asthma attacks, hypersensitivity pneumonitis, skin irritation, allergic reactions, and infections in immune-compromised individuals are all common symptoms families experience when mold is present in the home.

The best way to prevent mold in the home is to control moisture and clean up water damage quickly. Consider these basic suggestions for mold prevention in the home:

* Notice leaks right away and have them repaired promptly.

* Install mold-resistant products in your home, especially in the bathroom and basement.

* Turn on the exhaust fan when showering in the bathroom to remove moisture.

* Avoid installing carpet in the bathroom or basement where moisture is present.

* Hang used towels to dry before placing them in the laundry hamper.

* Make sure outdoor rain gutters are moving water away from the home.

* Cleanse indoor plants and change the soil often to prevent mold growth.

* Empty and clean refrigerator drip pans to remove standing water.

* Use dehumidifiers to help remove moisture in the air of your home.

* Open windows when possible to let fresh air in to reduce moisture.

* Have the home heating and cooling system checked regularly to make sure it’s operating properly.

* Increase circulation by placing furniture away from the wall and opening doors to closets and rooms.

If you suspect mold issues, don’t wait. For information on dealing quickly with mold in your home or preventing it in the first place, contact us at 954-923-3340 for a FREE assessment.

Toxic Black Mold Removal

Sat, 16 May 2026 07:21:33 GMT

Living in South Florida, mold is present all around us, it can develop from leaves decaying, or grass being cut, however, this type of mold referred to as penicillum/aspergillus is typically harmless in low levels. There are so many varieties of mold but only certain species can be considered harmful to your health, and result from direct water intrusions.

Toxic black mold or black mold is a name commonly used for Stachybotrys (aka Stachy). It is one of the most infamous toxic molds because it can grow in houses and is extremely dangerous to humans. Stachybotrys is known as a toxic mold because it produces toxins called mycotoxins. Toxic black mold is a greenish-black gelatinous mold. It is usually slimy because of a wet layer on the top. However if a toxic black mold colony’s water source runs out it can appear dry and powdery.

Can mold make me and my family sick?

Mold can affect the health of people who are exposed to it. People are mainly exposed to mold by breathing spores or other tiny fragments. People can also be exposed through skin contact with mold contaminants (for example, by touching moldy surfaces) and by swallowing it. The type and severity of health effects that mold may produce are usually difficult to predict. The risks can vary greatly from one location to another, over time, and from person to person.

Toxic Black Mold Symptoms

The mycotoxins of toxic black mold can possibly cause people to suffer symptoms. The general types of symptoms caused by toxic black mold include:

Respiratory problems
Skin inflammation
Hemorrhage
Irritation of the mucous membranes
Damage to internal organs
Mental impairment
Tiredness
Nausea
Immune system suppression

Toxic Black Mold Removal

Never try to remove toxic black mold on your own. Disturbing toxic black mold can make it release huge amounts of spores and mycotoxins throughout your home, making your symptoms much worse.

If you have toxic black mold in your home you should talk to South Florida Water and Mold Restoration, Inc., a professional mold removal service experienced in removing toxic black mold. We can remove the mold with minimal disturbance, while also containing spores and mycotoxins.

Where Toxic Black Mold Grows and What Causes It

Toxic black mold grows best in warm conditions and is found in many countries throughout the world. Outdoors, toxic black mold grows in soil and on plant debris. Indoors, toxic black mold needs materials high in cellulose and low in nitrogen to grow on. This means toxic black mold can grow on many common indoor building materials.

When toxic black mold does grow in the home it’s usually in a place out of sight. Toxic black mold needs a lot of moisture for a long time before it can begin to grow. This is why it often grows where there has been a water leak hidden from view. Leaks inside walls, above ceilings or under floors are common causes of toxic black mold.

Toxic Black Mold Treatment

There is no cure or antidote which can be taken for toxic black mold. The only solution is to remove the toxic black mold from your environment safely or remove yourself from the environment. Once you are away from toxic black mold your body will start to recover and most of your symptoms should go away over time. However some of the damage from toxic black mold can be permanent so it’s important that you hire a professional mold remediation company to solve your problem.

Call South Florida Water and Mold Restoration at 954-923-3340 for a free consultation, we are always available to discuss your mold removal concern.

Mold Removal Hollywood Broward County

Sat, 16 May 2026 07:19:18 GMT

Experiencing a mold problem in South Florida is quite common. Many of the Condominium owners in Hollywood are seasonal, so they travel to the area on a part-time basis, leaving their property entrusted to others to watch over. If a small leak occurs from a pipe in the wall, or a water heater, or any failure of a plumbing item, it can cause a tremendous amount of damage as it may not be occupied at the time of the water leak. Many Hollywood condo owners utilize a neighbor or friend to check on the unit occasionally, but that may not be enough.

Recently, we received a call from a nice couple who reside out of state and come down to Hollywood for the winter on a part-time basis as they are not yet retired. They have a friend and a neighbor who take turns checking on the unit. This unit was being checked once every two weeks. Unfortunately, a pipe failed in the ceiling of the guest bathroom, causing a water intrusion into the unit, which went undetected for over a week. By the time the unit was checked, the damage was already done. Many building materials such as drywall, baseboard, carpeting and bath vanities were completely saturated with water and because it remained wet for so many days, mold began to form in many parts of the condo unit. Also, the personal belongings such as clothing, shoes, handbags, were all contaminated with mold.

The problem with a water leak is the moisture creates humidity in the air space, which causes microscopic mold to form. Once that happens, the mold in the air starts to land on the personal belongings, flooring and/or furniture. The damage that is caused by a water intrusion will accelerate rapidly if not addressed by removing the moisture from the air through the use of dehumidification and air movement. Another issue of possible concern is the HVAC and duct system. If the HVAC system is operating during the formation of mold in the air, then it is likely that the duct system will pick up the mold spores in the air and cross contaminate other parts of the unit. In this scenario, the entire HVAC and duct system would need to be cleaned and sanitized to prevent an air quality issue that will repeat itself by just turning on the HVAC system.

The condo association will not take full responsibility for everything that is damaged even though it was a pipe owned by the association that caused the damage. They will typically only pay for removal and replacement of the drywall. Therefore, it’s very important that a condo owner always maintain insurance for the inside of the condo including their personal belongings. The importance of this cannot be understated as many times the water intrusion that occurs in a condo is something that could not be prevented as there are many causes outside your control such as the neighbor above you who had a water heater leak, or their toilet overflowed, and the water leaked down into your unit. These events are unpredictable, and are accidents, and insurance will cover you for the damage if you do everything possible to mitigate the damages.

We recommend that you always use a restoration contractor of your choosing, instead of using the restoration company recommended by the insurance adjuster, or association. Remember, they are mainly looking out for their best interests, which may be to save money. As a result, they may attempt to control the restoration project by minimizing the scope of work that is necessary to bring the property back to a pre-loss condition. If your mold problem is visible, you may want to consider air quality testing to determine the extent of the mold issue.

Either way, find your own contractor, ask lots of questions, check their credentials, get referrals, and you should be able to select the most experienced contractor based on the information acquired.

South Florida Water and Mold Restoration, Inc. works with Hollywood condo owners to restore their property after a water damage or flood, or to perform a safe mold remediation.

We spend a great deal of time discussing the issues of concern, and recommending the best approach to the situation.

Before you proceed with your restoration project, call South Florida Water and Mold Restoration, Inc. to discuss the circumstances, and to schedule a site visit so we can meet in person to identify the issues and to develop a plan of action.

Call us for all your mold removal needs, at 954-923-3340 , we are always available, 7 days a week.

Mold and Cabinetry

Sat, 16 May 2026 07:17:41 GMT

Cabinetry is a common place to find mold especially under a sink cabinet. Typically, there are quite a few water sources in a kitchen such as a dishwasher, faucet, and garbage disposal, or ice maker line that can fail and cause a flood or slow steady leak. When cabinetry is built-in, a leak isn’t detected very easily as the cabinetry may absorb some of the water or the water may be traveling to until it can’t go any further and cause a problem where it stops. The damage from an ongoing leak behind built cabinetry can be severe due to lack of air flow behind the cabinets. It’s a dark, moist, and porous environment and in a few days of a water intrusion, mold may begin to form.

Finding the exact source of the leak is critical to prevent further damage. If the problem has been ongoing, removal of the cabinetry may be required to dry out the wall behind it. If that’s the case, then you may want to consider safety precautions such as building a containment when removing moldy cabinetry to prevent cross contaminating the air quality of the area.

Often, people ask me if they can use bleach to get rid of mold. The answer is No. Although bleach will kill and decolorize mold, it does not remove mold. Dead mold can still cause allergic reactions. It is not necessary to kill mold to remove mold. The Environmental Protection Agency (EPA), the Center for Disease Control (CDC) and the New York City Health Department agree that bleach or other biocides should not routinely be used to clean up mold .

Porous building materials that have mold on them, such as visible mold growth on drywall, or baseboards, or mold under the carpet etc., must be removed and discarded. The open wall cavity or area is then treated with hepa vacuuming and antimicrobial solution applied.

You will know the mold remediation is complete when there is no visible mold remaining and there is no dust or dirt remaining that could contain large amounts of mold and mold spores. You may decide to have a post remediation clearance test of the air to confirm it’s normal.

South Florida Water and Mold Restoration is a licensed and insured mold remediation firm, and we are a state licensed general contractor, so we can offer rebuild services such as flooring, drywall, baseboard, paint and more.

If you suspect a problem, or see visible mold please call us at South Florida Water and Mold Restoration, Inc. 954-923-3340 with any questions you may have, we are available 7 days a week, 24 hours a day, and we are here to help you or just discuss your problem.

South Florida Water Damage and Direct Insurance Billing

Sat, 16 May 2026 07:16:02 GMT

If you experience water damage in your South Florida home, you may decide to file a claim with your insurance company to pay for the costs to restore your property especially if there is permanent damage. Typically, there is a deductible that the homeowner would have to absorb before the insurance company would issue a check. Many times, the homeowner does not have the extra money sitting around to pay for the costs to hire a professional water damage restoration company. Understanding this limitation, we will bill your insurance company directly, while keeping both you and the insurance company informed throughout the drying process. We eliminate the headaches of water damage and insurance claims and get you back to normal in a dry and safe environment as fast as possible.

It’s not surprising that Water damage in South Florida accounts for more than 75% of property claims and filing a claim can be intimidating. For this reason, it is important that you go over your policy in detail before you have a claim, because water damage coverage depends on the specific cause of the water damage and the policy language of your specific policy.

Below is a list of some common water damage claims:

Your washing machine malfunctions, overflows (something we have seen many many times), and floods your home or an ice maker line is broken; Most of the time water damage caused by a malfunctioning appliance is covered by property insurance;
Water from a broken pipe in your home or business causes damage to your structure ; This can be a little tricky. In general damage from a burst pipe is covered, but some policies exclude damage caused by a pipe that has been leaking over time. So in general, if a pipe breaks and water goes all over the place, it will be covered. But if a pin hole leak causes damage that you don’t notice for some time, it may not be. That’s why it is so important to know your policy.
Water leaks through your roof during a heavy rain storm damaging your home or business; The water damage to your property would be covered in the typical policy. Also water entering through a window broken in the storm would also be covered.
Water from the soaked ground seeps into your property soaking floors and walls. Usually damage from seepage is not covered because it is considered a maintenance issue. However, if the water is the result of area wide flooding, you would be covered if you had a Flood Insurance policy. Property insurance does not cover damage from floods. You must purchase Flood Insurance for that type of protection.

Prompt attention to a water intrusion is always the best approach to prevent further damage, and the formation of mold growth. If you experience a water damage or flood in South Florida, please call South Florida Water and Mold Restoration immediately to discuss the best approach to your problem. We have trained staff available 24 hours a day to serve you.

The best way to reach us is by calling 954-923-3340 and be sure to have your insurance policy information ready. If you don’t have insurance, we can still assist you with our negotiated self- pay program which will also allow you to minimize the damage being caused by a water intrusion.

Miami Mold Remediation

Sat, 16 May 2026 07:14:46 GMT

South Florida Water and Mold Restoration is a local restoration company serving the Miami area specializing in mold remediation, water damage and general construction. We appreciate the opportunity to bring our well trained and experienced mold remediation staff to your Miami home or Miami property to perform professional mold removal. Our firm is familiar with all the issues related to mold damage and how it can be hazardous to occupants of the home, causing “Sick Building Syndrome”.

Who needs mold remediation?

If a Miami property has elevated levels of toxic mold, it may require mold remediation to safely remove mold and not cross contaminate or affect other areas of the property. Some of the symptoms of Sick Building Syndrome are commonly known to be a runny nose, eye irritation, dry cough, difficulty breathing or headaches. This is can be a frustrating situation as moisture sources causing mold can go undetected. Over time, mold can grow within the walls, air ducts, or other locations that are not visible. If you are experiencing any of these symptoms or have experienced a flood or water damage in Miami, it’s possible you could have a mold problem. There is no question that Sick Building Syndrome will get worse over time.

What is the objective of Mold Remediation?

The answer is basic; the objective is to return an indoor environment to normal, within natural levels of mold particles on surfaces and in the air. Removal of all mold spores is impossible, and unnecessary, as mold spores are everywhere in our natural environment, and usually not problematic unless found at an elevated level within a contained airspace.

Before you proceed with a mold remediation, it’s important to find a state licensed and certified firm that specializes in mold remediation and mold removal in the Miami area. You want a specialist and a professional group that can guide you through the process.

South Florida Water and Mold Restoration is a state licensed and certified Miami mold remediation company performing numerous mold remediation and mold removal projects in Miami. We are dedicated to providing Miami property owners with the best quality work possible. We are always available, 24 hours a day, 7 days a week, 365 days a year.

If you have any questions, or if you’re curious about the process, please do not hesitate to contact us at 954-923-3340 or email us at Lisa@watermold911.com

We are sincerely here to help you with your Miami mold problem.

How Do I Know If I Have Mold?

Sat, 16 May 2026 07:12:42 GMT

If you have asked yourself this question before, you are not alone; we receive calls from South Florida homeowners quite often asking the same question just because they are not sure. Your home may have a musty smell, or you could be experiencing mold symptoms such as runny nose, headaches, or allergies. One thing we cannot control is the fact that we live in a humid environment in South Florida and the likelihood of mold growth is much greater in a humid climate. However, you should not be living with mold in your home as mold could affect the quality of the air you breathe

If you called South Florida Water and Mold Restoration and asked “how do I know if I have mold?”, we would ask you if there was any kind of water damage , flood or water leak in the property. If you did experience a water intrusion, we would ask if the area was properly dried with the use of dehumidification and air movers (fans) immediately after the water intrusion. If not, there is a good chance mold could have developed as mold only needs a food source such as drywall, cabinetry or flooring, and moisture to grow and amplify. If you can visibly see mold on the walls, floors or cabinetry, it may be too late to salvage the building materials as porous materials contaminated with mold cannot be cleaned.

One more factor to investigate is the possibility that mold has contaminated the air you breathe. When mold grows, it forms mold colonies which can release microscopic mold spores into the air and, as the air is circulated in the HVAC/duct system, the mold is also being circulated. This means that a mold problem in the Kitchen could cross contaminate other parts of your home by traveling through the HVAC/duct system. If this occurs, the HVAC and duct system may require mold cleaning and sanitization.

Another type of mold problem which you smell and may not see is referred to as a humidity driven or lack of humidity control issue (aka condition 2). We live in a humid climate so we need to make sure the inside of our homes are not humid and we do this by keeping the humidity low by using an HVAC system to cool the area. The humidity inside a property should be between 40-60%, if it goes above 60%, the possibility of mold growth is likely. If you have this type of mold problem, it’s important to have a licensed HVAC contractor inspect the system. Typically, with a condition 2 mold problem, you may see a white or green light dusting on your clothes or furniture or you may not see anything. This means that mold is forming in the air due to the moisture content from the high humidity and the mold is settling onto surfaces. A mold remediation for a humidity driven mold problem is a full wipe down of all surfaces with an antimicrobial solution and HEPA vacuuming all surfaces.

The most accurate and reliable way to know the extent of your mold problem is to have an air sample taken; this is referred to as an air quality test. At a minimum, a sample of the affected area is taken, and a sample outside the property. Once the air sample is taken, it will be sent to a 3 ^rd party laboratory to determine if the mold spore count is elevated and the type of mold species. Usually, the test results come back within 24-48 hours of the air sample. It’s important to note that a mold remediator should not be conducting mold testing. Always hire a state licensed mold assessor to test for mold, and a state licensed mold remediation company to safely remove mold, never use the same company for both as it could present a conflict of interest. As a side note, I have received many calls from homeowners who purchased a mold kit from home depot to determine if they have mold and they would tell me it came back positive for mold. Don’t waste your money, the home depot mold kit is not accurate, and since we live in a humid climate, it will grow mold almost anywhere you place the kit.

If you receive the test results from the air quality test, please contact us at South Florida Water and Mold Restoration 954-923-3340 or email us to schedule a free consultation to discuss the best approach for a safe and effective mold remediation. Please feel free to contact us with any questions you may have.

South Florida Water Damage

Sat, 16 May 2026 07:10:56 GMT

South Florida Water Damage and Mold Growth

Experiencing a water heater leak or any other South Florida water damage can be very frustrating. For example, the water can leak inside the wall detected and travel around the perimeter. Consequently, it becomes visible either by evidence of standing water, or by visible mold growth. For example, you may see the mold on the walls, baseboard and/or carpet. Naturally, this is especially concerning for people who own or live in apartments or condominiums. Of course, the leak will almost always penetrate through to the floors below. If gone undetected, it can cause a tremendous amount of water damage and mold growth. For all those property owners that live in South Florida only part-time, this story is an eye opener: the wall undetected and travel around the perimeter of the room until it becomes visible either by evidence of standing water, or by visible mold growth on the walls, baseboard and/or carpet. This is especially concerning for people who own or live in apartments or condominiums as the leak will almost always penetrate through to the floors below. If gone undetected, it can cause a tremendous amount of water damage and mold growth. For all those property owners that live in South Florida only part-time, this story is an eye opener:

Case Study:
A few years ago, we received an emergency call from the owner of a local condominium who lived in another state most of the time. The owner had received a bill from FPL and the amount of the bill was unusually high considering they only live here for a few months out of the year. The owner sent someone in the unit to adjust the thermostat as FPL suggested. When the unit door was opened, water came pouring out, and at least 2-3 inches of standing water was seen throughout the unit.

The cause of the problem: the water heater was leaking, and the heating element inside the water heater was working overtime to heat the new water entering the tank, thus a large electric bill. The water had been leaking for quite some time as the walls from floor to ceiling were covered with visible mold growth. In addition, the ceilings were also moldy from the condensation which developed from the air space becoming fully saturated with humidity as a result of the standing water. All of the contents inside the unit such as photographs, books, furniture, linens were all water and mold damaged and could not be salvaged at all.

After shutting off the main valve to the water heater, the first course of action was to remove all the standing water with powerful truck mounted water extraction equipment. Then, we placed large commercial grade dehumidifiers throughout the unit to remove the moisture in the air and bring the humidity inside the unit down to below 60%. Humidity levels above 60% inside a property have a greater risk of developing or growing mold, recommended humidity levels should be 40-60%.

Due to the significant mold detected, we did not use air movers (fans) to dry out the unit as we normally would. The reason being that air movers would only serve to blow the mold spores around the air and make it a more difficult environment for the workers to complete the water damage restoration and subsequent mold remediation.

Once the humidity levels were within normal range, the entire unit was demolished, all contaminated walls, bathrooms, kitchen, and baseboards were safely removed and discarded. Once all mold contaminated building materials were removed, we utilized commercial grade air scrubbers to recycle the air, and we proceeded to micro clean and hepa vacuum the entire unit, all horizontal and vertical surfaces, and applied antimicrobial solution to all areas.

Luckily, the owner had homeowners insurance to cover the cost of the water damage restoration , mold remediation and reconstruction; however, they were slightly under-insured, and did not get the full value of all their contents that were destroyed. We worked closely with the insurance adjuster to agree on the scope of work necessary to restore the property, and the owner agreed to sign a Direct Insurance Billing authorization. As a result, the owner received a fully reconstructed unit without any out of pocket expense to them for our services.

Some lessons learned from this case study are:

1. schedule someone to check the inside of your property regularly if you are absent from the property for any length of time;

2. consider shutting the main water valve off while you are away;

3. review your homeowners insurance policy, make sure you have:

(a) mold coverage – minimum coverage of $10,000

(b) confirm your coverage limit is sufficient should you experience a total loss including drywall, baseboard, bathrooms, kitchen, flooring, and personal contents, this can add up quickly!

Most importantly, if you have a flood, water damage, or in need of a mold remediation, call South Florida Water and Mold Restoration, Inc. as soon as possible in order to minimize the potential for South Florida water damage.

How long does it take to perform a mold remediation?

Sat, 16 May 2026 06:29:55 GMT

The extent of the problem and size of the property will be the main factor when determining the schedule and time frame for the work to be completed. Typically, the average mold remediation will take between 2-4 days, the larger the job, the more technicians we dedicate to the job to be completed in a short timeframe.

Let us use our years of experience to help you

Please fill out the form and we will get back to you shortly.

Example Mold Remediation Project

The work always commences on a work day, and once the physical work is complete, we allow the air scrubbers to work for an additional day before the post remediation verification (PRV) test (aka clearance test) is performed. For example, if the scope of work requires 2 working days, on day 4 the PRV test would be taken, with the test results coming back sometime on day 5. The original schedule can change if unforeseen conditions exist causing more work to be performed than anticipated, however, that cannot be determined until the work commences.

Any reconstruction work would commence after the test results are received indicating the air quality is within normal levels, or back to a pre-loss condition. Since we are a State of Florida Certified General Contractor, we can provide you with any reconstruction services so you are working with one company throughout the restoration project.

Take charge of your mold remediation

1-954-923-3340

Who Is Qualified To Perform Mold Remediation?

Sat, 16 May 2026 06:17:11 GMT

On July 1, 2011, the State of Florida passed a law requiring anyone performing mold remediation or mold assessment to attend required educational classes, and apply to the State of Florida Department of Business and Professional Regulation for licensure.

The Florida Legislature found it necessary in the interest of the public safety and welfare, to prevent damage to real and personal property, to avert economic injury to the residents of this state, and to regulate persons and companies that hold themselves out to the public as qualified to perform mold-related services. Prior to enactment of this law, anyone could perform these services without proper credentials, so this new law has raised the standard for everyone performing these services.

Most property owners are unaware of the difference between a Mold Remediator and a Mold Assessor. We receive a lot of inquiries from property owners asking us to perform Air Quality testing or asking what the difference between is between mold remediation and mold assessment. We always advise property owners that the company who performs the inspection and testing should be independent of any mold remediation companies. This is the industry’s #1 conflict of interest, therefore, the State of Florida is regulating the industry to prevent this conflict of interest. For example, it’s in the best interest of the mold remediation contractor to find mold in your property if they performed air quality testing so they can benefit from their findings, however, this can lead to unscrupulous contractors taking advantage of homeowner’s who simply do not know better. Below is an explanation of Mold Assessment and Mold Remediation:

Mold assessment is a process performed by a mold assessor that includes the physical sampling and detailed evaluation of data obtained from a building history and inspection to formulate an initial hypothesis about the origin, identity, location, and extent of amplification of mold growth of greater than 10 square feet.

Mold remediation is the removal, cleaning, sanitizing, demolition, or other treatment, including preventive activities, of mold or mold-contaminated matter of greater than 10 square feet that was not purposely grown at that location; however, such removal, cleaning, sanitizing, demolition, or other treatment, including preventive activities, may not be work that requires a license under Chapter 489, Florida Statutes, unless performed by a person who is licensed under that chapter or the work complies with that chapter.

According to the Florida State Statute 468.8419 Prohibitions; penalties.—
(1) A person may not: Perform or offer to perform any mold assessment to a structure on which the mold remediator or the mold remediator’s company provided a mold remediation within the last 12 months; Perform or offer to perform any mold remediation to a structure on which the mold assessor or the mold assessor’s company provided a mold assessment within the last 12 months.

The safest and most protective approach to a mold problem is to follow the 3-step Process:

The establishment of the problem – (Mold Assessment and Mold Remediation Protocol) by a Florida Licensed Mold Assessor
The repair of the problem – (The Mold Remediation) by a Florida Licensed Mold Remediator
The verification that the mold remediation was successful – (The Post remediation Verification Inspection or Clearance Test) by a Florida Licensed Mold Assessor

Following the 3-step process will protect your financial investment, and ensure you are resolving your mold problem effectively and safely as best as possible.

Will I Need To Move Out Of My Home If I Have Mold Damage?

Sat, 16 May 2026 04:21:22 GMT

It all depends on the extent of the mold in your home and the kind of damage it has caused. For example, a leak from the HVAC/air handler could cause mold to grow behind the AC unit on the drywall and baseboard. In order to access the area, and perform a proper mold remediation, the air handler would need to be removed by a licensed HVAC contractor in order to remove the affected building materials and to clean the affected area.

Once the remediation is complete, and a clearance test has been performed, the drywall (and painting) will need to be installed prior to reinstallation of the air handler. Therefore, it may be several days before you will have the air conditioning system up and running again. Without AC in South Florida, you may choose to move out during the mold remediation process.

Another example is when the bathroom or kitchen is affected. Although you may reside in the property during the work being performed, you may choose not to stay there if you don’t have a working bathroom or kitchen. In addition, there will be equipment running 24 hours a day until the mold removal is completed. Some homeowners complain of the noise, while some are unaffected by the inconveniences of the work being performed while they remain in the home.

If the mold has affected a large portion of your property, it may be absolutely necessary to move out during the remediation as it may not be possible to reside in the home if the scope of work is extensive. On the other hand, if the mold issue is limited to removing drywall that does not affect other living space being used, then you may continue to reside in the property during the mold remediation.

DO I HAVE MOLD IN MY HOME?

Sat, 16 May 2026 04:18:54 GMT

Do I have mold in my home? While at my son’s baseball practice, on two recent occasions, I was asked about mold and how a homeowner can detect if they have mold in their home. These homeowners were concerned that their family was experiencing repeated issues with upper respiratory and bronchial infections, and symptoms similar to allergies. In both of these situations, neither homeowner has seen any signs of visible mold growth, nor have they experienced a water damage which could have contributed to a mold issue.

As we know, mold is ubiquitous, it’s everywhere especially in humid environments such as ours in South Florida. We can’t fully eliminate mold from our environment as mold grows outdoors on leaves, grass etc. and is blown around in the air. Small amounts of mold from the outdoors can enter the home through open doors, windows, vents, it can also become attached to clothing and be carried inside. The mold spores carried from outside into your home in this manner would be considered small amounts and should not significantly cause symptoms as we are exposed to mold blowing through the air outside. However, once mold grows inside, it has no place to go, and once the spore counts become elevated, it can travel through our HVAC system and cross contaminate other areas of the home.

Many areas in our home are prone to mold growth such as shower stalls, drywall, ceiling tiles, carpet, furniture, ductwork, paneling, wallpaper, cabinetry and anything that is porous. Once a porous building material gets wet from a leak and is not properly dried out within 24-48 hours, mold may begin to grow. If the leak continues providing mold with its much needed moisture to grow, then the problem can continue and start to produce mold spores in the air that you breathe.

Some molds produce toxic substances known as mycotoxins. These mold spores may cause allergens in the air especially for sensitive individuals like children, senior citizens and/or those who are immune compromised.

So what do you do? If you cannot see any signs of visible mold nor do you have a history or indication of a water damage in your home, then the only way to determine if the air quality is affected by mold is to have a state licensed mold assessor perform an air quality test. The results of the air quality test along with a visual inspection performed by a licensed mold remediator such as our company, will determine the best course of action and the scope of work that is needed to eliminate the issue.

It is important to identify the cause of the mold before you begin a mold remediation as you want to identify the exact source of the problem that caused the mold so it can be fully resolved.

90aa34c1

Water And Mold Restoration

Water And Mold Restoration ﻿

What is Water Damage Restoration?

What is Mold Damage Restoration?

How To Do Mold Damage Restoration

How To Do Water Damage Restoration

Water Damage Restoration Company

Get Professional Help Today

One Call Does it All!

Help is Just a Phone Call Away

There are a wide variety of drying devices, such as:

Untreated Water Damage Quickly Becomes a Mold Remediation Problem

Water Damage Restoration Company

What to do with wet books, files, or paper?

Costs associated with water damage restoration

How long does it take before you can start renovating after water damage?

Water Damage Mold

Water Damage Mold ﻿

The most common sources of water damage mold are:

Water damage mold does not only affect the health of the occupants of a building. It also affects the substance of a building.

Get Mold Remediation Help Today – Call Now!

Effective and Definitive Remedies for Water Damage Molds

How do professionals remove water damage mold?

Construction defects and damage

Mold Remediation Companies

Mold Removal Companies

Direct Insurance Billing

6 Common Reasons You Have Mold in Your Home

Do I Have To Use Insurer-Preferred Vendors?

Living with South Florida Tropical Storms

Review Your Policy Coverage, Limits

Video: Remediation Carpet Installation

Water Heater Leaks in Condominium

Uncovering Hidden Mold

MOLD REMEDIATION BACK TO SCHOOL SPECIALS

SPECIAL LIMITED TIME OFFER – MOLD CLEARANCE TESTING

Providing A Great Customer Experience

MOLD PREVENTION TIPS:

Toxic Black Mold Removal

Mold Removal Hollywood Broward County

Mold and Cabinetry

South Florida Water Damage and Direct Insurance Billing

Miami Mold Remediation

How Do I Know If I Have Mold?

South Florida Water Damage

South Florida Water Damage and Mold Growth

How long does it take to perform a mold remediation?

Let us use our years of experience to help you ﻿

Who Is Qualified To Perform Mold Remediation?

Will I Need To Move Out Of My Home If I Have Mold Damage?

DO I HAVE MOLD IN MY HOME?

Water And Mold Restoration

Water Damage Mold

Let us use our years of experience to help you